The sucker rod is a type of long and thin steel rod used to connect the pump made a low tempering carbon alloy steel made, which is an important part of the production device with a rod pump. The sucker rod string is made up of several sucker rods connected by a collar, which is connected in the oil pipe with an internal thread hoop and extends to the piston in the underground oil layer to pump oil through reciprocating motion.
Conventional sucker rod production technology is simple, low cost, small diameter, a wide range of applications, accounting for more than 90% of rod pumping Wells. Conventional steel sucker rods are divided into four grades: class C, class D, class K, and class H.D is the most commonly used grade sucker rod, steel sucker rod for medium and heavy-duty oil Wells. The most commonly used single length is 7.62 or 8 and 9.14 meters. The other grades are:
Grade C sucker rod: Used for shallow Wells and light loads. (not often used)
Class K sucker rod: Steel sucker rod for corrosive light to medium duty oil Wells.
Grade K and D sucker rod: Steel sucker rod with the corrosion resistance of grade K sucker rod and mechanical properties of grade D sucker rod.
Class H sucker rod: Steel sucker rod for heavy-duty oil Wells.
The sucker rod we can supply:
OD:13,16,19,22,25,29mm;
Length: 0.41, 0.1, 0.91, 1.22, 1.83, 2.44, 3.05, 3.66,8m, 7.62m;
Material: grade 1536, 4142.
Specification of Sucker rod
Specification | 5/8" | 3/4" | 7/8" | 1" |
External thread | 15/16" | 1-1/16" | 1-3/16" | 1-3/8" |
rod diameter | Ф16 | Ф19 | Ф22 | Ф25 |
Threaded joint shoulder | Ф31.8 | Ф38.1 | Ф41.3 | Ф50.8 |
The physical property of Sucker rod
Grades | Y.S〥sMpa | S.s 〥bMpa | Elongation 〥% | Reduction of area Ψ% | Impact toughness akI J/cm2 |
D | ≥620 | 794-965 | ≥10 | ≥50 | ≥60.8 |
HL | 793-962 | 966-1136 | ≥12 | 45-55 |
Coupling specification
Specification | Internal thread | Length, mm | Collar diameter, mm | |
Full size collar | Small hole coupling | |||
5/8" | 15/16" | 102 | 38.1 | 31.8 |
3/4" | 1-1/16" | 102 | 41.3 | 38.1 |
7/8" | 1-3/16" | 102 | 46 | 41.3 |
1" | 1-3/8" | 102 | 55.6 | 50 |
Sucker rod offers good high strength, high flexibility and good weldability, which can greatly reduce sucker rod failure frequency and tubing wear. World iron&steel manufacture, supply, sell API 5CT OTCG, casing pipe, sucking rod and other accessories in various sizes and specifications, if you are looking for this material, please contact us or get a quotation. Not only do we have all kinds of sizes, but we also have all kinds of sizes that are hard to find.